Wheel Spacers for Kubota RTV. Wheel Spacers for John Deere Gator, XUV Utility. 5x114.3 or 5x4.5 bolt pattern, Heavy Duty, Steel, Welded, Custom Made, Many widths.
These are Adapters in both 1" and 2" widths as used to install 4 Bolt Polaris style rims/wheels on the 5 Bolt Kubota and John Deere hubs.
Spacers and Adapters can be custom made in any width you desire. This is one of a set of 5" spacers made to match wheel track width to crop row width.
Wheel Spacers and Adapters are now available with proper thread size and hub opening size for your Kubota RTV or John Deere Gator, 4x2, 4x4, 6x4, and XUV Utility Vehicles.
Each set is custom made to order from 1//4" plate steel, fabbed and generously welded and can be made to any width of your choosing...in 1/2" increments from 1" wide up to 5" wide. Spacers are priced at $179.95 (including US Shipping and lug bolts) plus $5 per half inch width increment over 2.5".
Ten factory supplied lug bolts are also included with each pair of spacers.
Exterior Diameter is 6". Center Hub hole is 3.125". Bolt Pattern is 5/114.3 or 5x114.3 (5x4.5). Thread size is 7/16"x20.
Special Bonus for Wheel Spacer Customers: Included with each pair of wheel spacers are these special rim installation guide bolts, a $10 value. Attaching the spacer to the hub flange is not really a problem, but due to the weight and bulkiness of the rim and wheel, holding it up into place while you get the rim lug bolts started can be a bit of a nuisance. Simply install one of these special bolts and it will assist with aligning the rim to the lug holes. Once the other lug bolts have been started, remove the guide bolt and install the last lug bolt.
Wheel Spacers for Kubota RTV. Wheel Spacers for John Deere Gator, XUV Utility. 5x114.3 or 5x4.5 bolt pattern, Heavy Duty, Steel, Welded, Custom Made, Many widths. 
These are Adapters in both 1" and 2" widths as used to install 4 Bolt Polaris style rims/wheels on the 5 Bolt Kubota and John Deere hubs. 
Spacers and Adapters can be custom made in any width you desire. This is one of a set of 5" spacers made to match wheel track width to crop row width.
Special Bonus for Wheel Spacer Customers: Included with each pair of wheel spacers are these special rim installation guide bolts, a $10 value. Attaching the spacer to the hub flange is not really a problem, but due to the weight and bulkiness of the rim and wheel, holding it up into place while you get the rim lug bolts started can be a bit of a nuisance. Simply install one of these special bolts and it will assist with aligning the rim to the lug holes. Once the other lug bolts have been started, remove the guide bolt and install the last lug bolt.
3" Wide Wheel Spacers for Polaris Ranger. The 18" Rear Tracks require 3" Spacers for shock absorber clearance. The 12" Tracks require 1.5" Spacers. 
Spacers can be made to order in just about any width. These are 5" wide for Agricultural Crop Spraying use.